You have selected

Apple iPhone 5s Apple iPhone 5s

Switch device

Apple iPhone 5s MMS manual configuration

Apple iPhone 5s
Apple iPhone 5s - MMS - manual configuration - Step 1
  • MMS settings can be sent to your iPhone 5S via SMS. Click here for instructions.
  • You can also configure your phone manually for MMS. Follow the step-by-step instructions below.
Apple iPhone 5s - MMS - manual configuration - Step 2
  • Go to the Start screen.
  • Choose Settings.
Apple iPhone 5s - MMS - manual configuration - Step 3
  • Choose Cellular.
Apple iPhone 5s - MMS - manual configuration - Step 4
  • Enable Cellular Data if this option is not enabled.
  • If Cellular Data is enabled, go to the next step.
Apple iPhone 5s - MMS - manual configuration - Step 5
  • Scroll down.
  • Choose Cellular Data Network.
  • If Cellular Data Network is not available, manual configuration is not possible. In this case, connect the device to the computer, and use iTunes to install the ‘Carrier Settings’.
Apple iPhone 5s - MMS - manual configuration - Step 6
  • Scroll down.

    Edit your MMS settings as follows:

  • Under APN, enter mms
  • Under Username, enter nothing
  • Under Password, enter nothing
Apple iPhone 5s - MMS - manual configuration - Step 7
  • Under MMSC, enter http://192.168.151.3:8002
  • Under MMS Proxy, enter 192.168.151.2:8080
  • Under MMS Max Message Size, enter 300000
Apple iPhone 5s - MMS - manual configuration - Step 8
  • Choose Cellular.
Apple iPhone 5s - MMS - manual configuration - Step 9
  • Choose Settings.
Apple iPhone 5s - MMS - manual configuration - Step 10
  • Scroll down.
  • Choose Messages.
Apple iPhone 5s - MMS - manual configuration - Step 11
  • Enable MMS Messaging if this option is not enabled.
  • If MMS Messaging is enabled, go to the next step.
Apple iPhone 5s - MMS - manual configuration - Step 12
  • The iPhone 5S has been configured for MMS.
  • Return to the Start screen.
Apple iPhone 5s - MMS - manual configuration - Step 13
  • Switch your iPhone 5S off and then on again to ensure the new settings are activated.
Back Step 1 of 13 Next