You have selected
Apple iPhone SE - iOS 13 MMS Manual configuration
* When you first insert a Salt SIM card into your Apple iPhone SE, it will normally set up MMS automatically or it might receive the configuration from the mobile network.
* In some cases, you might want to manually enter the MMS configuration on your Apple iPhone SE. Follow these steps to learn how.
* Go to the Start screen.
* Choose *Settings*.
* Scroll down.
* Choose *Mobile Data*.
* Choose *Mobile Data Network*.
* If *Mobile Data Network* is not available, manual configuration is not possible. In this case, connect the device to the computer and use iTunes to install the 'Carrier Settings'.
* Edit the details for *MMS* as follows:
* Under *APN*, enter mms
* Under *Username*, enter nothing
* Under *Password*, enter nothing
* Under *MMSC*, enter http://192.168.151.3:8002
* Under *MMS Proxy*, enter 192.168.151.2:8080
* Under *MMS Max Message Size*, enter 300000
* Choose *Back*.
* Return to the Start screen.
* To finish the process and activate the settings, you need to restart the device. Your Apple iPhone SE will then be configured to use MMS.
* For instructions on how to restart your device, follow the next steps.
* To turn off the Apple iPhone SE, press and hold the power button on the top of the device.
* Drag the on/off symbol to the right.
* The Apple iPhone SE has been turned off.
* To turn on the Apple iPhone SE, press and hold the power button on the top of the device.
* If this screen appears, press the home key.
* If this screen does not appear, go to the next step.
* If this screen appears, enter the PIN code and choose *OK*.
* If this screen does not appear, go to the next step.
* The Apple iPhone SE is now ready for use.
* Restart your Apple iPhone SE to make sure the new configuration has been activated.